With the development of industrial control technology, wireless remote control telemetry system has also been widely used in domestic oil wells. The main sensors are briefly described below:

1. Pumping unit well power monitoring (three-phase voltage and current input, RS485 output)

An isolated combination parameter intelligent sensor designed specifically for pumping wells to replace analog transmitters. The detection signal is AC 3-phase voltage and 3-phase current; the output content is 3 voltage (effective value), 3 current (effective value), active power, reactive power, power factor, active power, reactive power and frequency. data. The output can obtain the standard value of the required electrical parameter number from the communication interface, and does not require the RTU to perform AC sampling.

2.Dedicated fixed load sensor (range: 0 ~ 150kN; output sensitivity: 1mVV)

After more than ten years of use in the oil production plant, it is constantly improved; fully sealed and waterproof design to meet all-weather use; optimized plugs for improved reliability; easy and safe operation; consistent output and complete interchangeability.

3.Pressure sensor (range: from 0 ~ 10Kpa to 0 ~ 500Mpa, output: standard two-wire system)

This product uses the imported oil-filled isolation component or the whole stainless steel strain-inducing body to combine the solid-state integration process with the isolation diaphragm technology. The diffusion silicon chip is installed in a cylindrical cavity filled with silicone oil, through the stainless steel diaphragm and The outer casing isolates it from the measuring medium. The product can work in harsh environments.

4. Angular displacement sensor (range: 0~100, 0~180, 0~270, 0~340[continuous] output 0-5V)

This product is a sensor for measuring the rotational position of an object with a linear relationship between voltage output and shaft rotation angle. It is characterized by high precision, long life, good output smoothness and so on.

5. Temperature sensor (wellhead temperature PT1000 resistance output)

Imported PT1000 package; static pressure resistance is greater than 30Mpa; temperature response time is fast; sensor shape can be determined according to user requirements; working temperature: -50 °C ~ +400 °C, accuracy grade A.

6. Infrared dual supervision (three monitors alarm sensor)

The high-performance dual-window detector with the highest technology in today's security field consists of a master-slave dual-group high-precision passive infrared detection device and an anti-glare circuit and a fuzzy logic digital core.